MACH 4^® Line Blades in Action
Next>>

MACH 4^® Line Blades Allow New Helpful Methods and Techniques

MACH 4® allows efficient low RPM method of trimming Use of 4 power line blades complements lower RPMs Better control into destructive, abrasive, or sensitive areas    Visible swath Low speeds – low RPM Power efficiency High power – high RPM cutting too Trim against fences without catastrophic failure Use worn line blades for vertical edging Prevent bogging/stalling Prevent wrapping in high grass and vines Control moisture content – nylon material/other developments Trimming with reverse line blades – high cutting quality (2 orange and 2 yellow)          Use line blades as a blower/sweeper	Cuts at idle RPM, if no clutch
The MACH 4® Trimmer doubles as quiet, powerful blower	The Stronger MACH 4® Line Blades Have More Power Their higher kinetic energy and stronger blade-like structure combine to deliver higher power with greater concentrated force to be applied to the vegetation it contacts. Higher speeds and potentially added power on the other hand can be more favorably used as a major benefit when you need to sever much heavier vegetation, but unfavorable if such heavy forces are applied against abrasive surfaces where any nylon copolymer will abrade or wear more rapidly. Therefore, the operator needs to adjust and control the process by choosing the proper and best operating speeds that achieve the real MACH 4® benefits. This is realized by running at part throttle for lower RPM’s when edging or at full throttle/higher RPM’s where added power may be required to cut into real heavy vegetation.

MACH 4^® Line Blades Enable You to Use Low RPM/Part Throttle

Learn low RPM cutting where the powerful line blades are designed to perform and operating stresses are greatly reduced. The efficient aerodynamic cutting line blades have more cutting power allowing you to trim with more control at reduced cutting RPM by using part-throttle. The benefits are the reduction of thrown debris, less noise and vibration, and lower fuel usage as well as reduced line blade wear. Ease off the throttle! It pays!

Surperior Performance

• Your trimmer becomes a more capable tool to do bigger jobs much easier
• Efficiently edge – precision trim, 50x farther without interruption (non-stop)
• Precision mowing quality reduces grass browning
• Delicate trimming against sensitive objects with better visuals (reflective line plane)
• Slices through heavy vegetation (heavy grass, weeds, most vines, light brush less than ¼”)
• Scalping – rip and scalp weeds, unwanted vegetation within flower and planting beds, and over-growth on asphalt
• Efficient, non-stop trimming against wood or wire fences (go low RPM’s)
• Comparative values to conventional line
• A 20 to 40 : 1 improvement when tested directly into abrasives
• 50x farther without having to replenish
• Kinetic energy density – increased force concentration 8-10x
• Noise level reduction – more than 200%
• Fuel consumption dramatically reduced – up to 50%

Next >>

Back to top